Clamping element with swivel insert and draw-down effect for pre-machining for direct clamping and for machining blanks.

Steel.

Body black oxidized.

The extremely sturdy structure, the high clamping force and compact design make the clamping element with draw-down effect suitable for pre-machining for direct clamping (OP10) with the 5-axis modular clamping system and for the rough part clamping of any plates and other workpieces.

The integrated self-aligning pad enables the clamping point to adapt to the workpiece geometry. This means that even oblique workpiece geometries can be clamped quickly and securely.

Various types of self-aligning pad cover a wide application range.

Any workpiece size can be clamped thanks to the two system sizes and the infinitely adjustable clamping system.

The clamping height of the workpiece can be flexibly adjusted using various positioning feet and the fine adjustment.

The interface for grid plates (grid size 40/50) and for the UNILOCK zero-point clamping system are integrated as standard.

- Draw-down effect.
- Clamping oblique workpiece geometries.
- Horizontal adjustment.
- Various workpiece seating heights possible.
- Integrated fine adjustment for clamping height.

1 Clamping element with swivel insert
1 positioning foot K0298.2081.

1) Caution: Risk of deformation!
No clamping claws may be applied in this area!

Style A: Smooth self-aligning pad
Style B: Self-aligning pad with POM insert
Style C: Serrated self-aligning pad
Style D: self-aligning pad with carbide insert

- Positioning foot K0298.
- Adapter plate for draw-down clamping system K2199.
- Adapter ring K2200.