Locating bushinges style a locating point for ball lock pins or locking pins and enable these to be securely and precisely engaged herein.

The locating bushinges with status sensor have a variably adjustable sensor integrated in the bushing. These enable electronic feedback as to whether a pin is located in the locating bushing or not.
When using several bushinges, it can be determined in which one a ball lock pin or locking pin is located.

Locating bushing steel or stainless steel 1.4305.

Sensor stainless steel.

Locknut brass.

Locating bushing and sensor bright.
Locknut nickel-plated.

The status sensor and locknut are supplied loose.
Max. tightening torque for the locknut: 1.2 Nm.

Inductive sensor:
Output circuit: PNP NO
Operating voltage: 10 - 30 V DC
Operating current: <100 mA
Contact gap: 1 mm
Switch frequency: <3500 Hz
Short-circuit proof: yes
Reverse polarity protection: yes
Rating: IP 67
Connection type: 2 m PVC cable
Temperature range: -25 °C - +70 °C
Approvals: CE, c UL us, EAC

Locating bushinges in conjunction with a status sensor enable actuation-dependent process control. In addition, it can be determined whether a ball lock pin or locking pin is in the desired position.

The sensor is fastened into the bushing using the locknut and then adjusted axially. The locknut is tightened to fixate the sensor in the final position.

The detailed procedure is described in the installation instructions.

Locating bushinges with status sensor are not suitable for personnel safety functions.

Style A: full thread
Style B: with thread and collar

1) LED

BN = brown
BK = black
BU = blue