Material
Body, stainless steel.
Seal, NBR.
Seal, NBR.
Version
Stainless steel bright.
Afficher plus
Afficher moins
Description
Product description
In its initial state, style A is clamped by a spring The locating cylinder is released by compressed air.
In its initial state, style B is released. The locating cylinder is tensioned by compressed air.
In its initial state, style B is released. The locating cylinder is tensioned by compressed air.
Material
Body, stainless steel.
Seal, NBR.
Seal, NBR.
Version
Stainless steel bright.
Note for ordering
Style A is marked with a groove.
Note
The stated clamping and retaining forces are related to an operating pressure of 0.5 Mpa.
When using several positioning units, the distance tolerance of ± 0.1 mm should not be exceeded.
Repeat accuracy ±0.2 mm.
When using several positioning units, the distance tolerance of ± 0.1 mm should not be exceeded.
Repeat accuracy ±0.2 mm.
Assembly
Installation dimensions are for a 6 mm thick plate.
Drawing reference
1) Style A ID groove
2) Pneumatic connection
3) Locating bushinging for locating cylinder
4) Style A locating cylinder
5) Style B locating cylinder
2) Pneumatic connection
3) Locating bushinging for locating cylinder
4) Style A locating cylinder
5) Style B locating cylinder
Accessory
K1739 locating bushings stainless steel.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.